English; Mounting Instructions - IKEA FÅVANG Bedienungsanleitung

ENGLISH

Mounting instructions

1. Mirror tiles can be fixed to almost all flat
surfaces.
2. Not recommended for use in ceilings,
bathrooms or in high humidity areas.
3. The self-adhesive corners should be
fixed to flat, clean and dry surfaces free
from dust, wax or silicone polish. They
should, if possible, be applied at room
temperature.
4. On porous surfaces, such as plywood
or fibreboard, the adhesiveness can be
improved by applying a coat of high-
gloss varnish.
5. Remove the self-adhesive corners from
the protective paper without touching
the sticky surface and press them onto
the back of the mirror tiles.
6. Pull off the protective film from the
corners and fix the mirror tiles to the
surface. See to it that the mirror tiles
are placed in the right position from
the beginning, as they are difficult to
remove and can only be fixed again with
new self-adhesive corners.
7. There should be an approx. 1 mm wide
gap between the tiles to compensate for
tolerances.
4