Network Configuration; Default Network Properties; Network Configuration With The Web Interface - OSRAM e:cue Bridge8 Bedienungsanleitung

5

Network configuration

The network properties of the device are preconfigured. The successful
installation of the power supply is required for changing the network
configuration. You can either adjust the network settings using the web
interface of the device.
5.1

Default network properties

The e:cue Bridge8 has as factory setting the default IP address
192.168.123.1.
Subnet mask: 255.255.255.0.
DHCP is disabled by default.
Login credentials for the web interface of the e:cue Bridge8:
The default password is: ecue
To change the network configuration use the web interface of the device.
5.2

Network configuration with the web interface

1. Open a common web browser on a connected PC. Enter the
e:cue Bridge8's IP address into the address bar:
e.g. http://192.168.123.1.
The web interface of the device is displayed:
Network configuration
19