Replacement Parts And Wearing Parts - Beurer IH 58 Gebrauchsanweisung

Storage and Temperature: -20 °C to +60 °C
transportation Relative humidity: 10% to 95%
conditions Ambient pressure: 700 to 1060 hPa
Aerosol properties 1) Aerosol delivery: 0.15 ml
2) Aerosol delivery rate: 0.03 ml/min
3) Particle size (MMAD): 4.12 µm
The serial number is located on the device or in the bat-
tery compartment.
Subject to technical changes.
Particle size diagram
Measurements were performed using a sodium fluoride
solution with a "Next Generation Impactor" (NGI).
The diagram may therefore not be applicable to sus-
pensions or highly viscous medications. You can obtain
more detailed information from the manufacturer of your
medication.
12. Replacement parts and wearing
parts
Designation
Year pack contains:
Mouthpiece
Nosepiece with comfort
attachment
Adult mask
Children's mask
Atomiser
Compressed air hose
Filter
Baby mask
Note
If the device is not used according to the instructions
specified, perfect functionality cannot be guaranteed! We
reserve the right to make technical changes to improve
and develop the product. This device and its accesso-
ries comply with the European standards EN60601-1,
EN60601-1-2 (CISPR 11, IEC61000-3-2, IEC61000-3-3,
IEC61000-4-2, IEC61000-4-3, IEC61000-4-4,
EC61000-4-5, IEC61000-4-6,
IEC61000-4-8, IEC61000-4-11) and EN13544-1 and are
subject to particular precautions with regard to electro-
magnetic compatibility. This device meets the require-
ments of European Directive 93/42/EEC for medical
devices, as well as those of the Medizinproduktegesetz
(German Medical Devices Act).
NOTES ON ELECTROMAGNETIC COMPATIBILITY
• The device is suitable for use in all environments list-
ed in these instructions for use, including domestic
environments.
• The use of the device may be limited in the presence
of electromagnetic disturbances. This could result in
issues such as error messages or the failure of the
display/device.
• Avoid using this device directly next to other devices
or stacked on top of other devices, as this could lead
to faulty operation. If, however, it is necessary to use
the device in the manner stated, this device as well as
the other devices must be monitored to ensure they
are working properly.
23
Material REF
602.15
PP
PP/silicone
PVC/aluminium
PVC/aluminium
PP/PC
PVC
PU
PVC 601.31
IEC61000-4-7,