Motorola XT180 Bedienungsanleitung Seite 7

Selecting a Channel and a Sub-Code
To select a Channel:
1. SEL/ button to enter Select Menu. Advance until the
Channel indicator blinks.
2. or to the required channel.
To select a Sub-code :
1. SEL/ button to enter Select Menu. Advance until the
Sub-code indicator blinks.
2. or to the required Sub-code.
3. Exit the Select Menu.
Select Menu
Your radio navigates through the Select Menu as follows:
Normal
Channel
1 - 8
Voice Operated Transmission (VOX)
Transmission is initiated by speaking into the microphone of
radio instead of the pushing the PTT button.
To select the VOX level:
1. MENU/GRP button to enter Common Menu. Advance and
select "VOX".
2. SEL/ to select.
3. or to the desired VOX sensitivity level.
4. Exit the Select Menu.
Note: Level "N"(OFF) disables VOX. Levels 1-5 set the
sensitivity of the VOX circuit.Use level 1 in quiet
environments, and use level 5 in very noisy
environments. You can find the appropriate
sensitivity level by speaking into the microphone. If
the flashes, your voice is accepted.
Transmitting a Call Tone
Your radio is equipped with 10 selectable call tones .
To select a call tone:
1. MENU/GRP button to enter Common Menu. Advance to
"TONE".
2. SEL/
3. or
4. Exit the Common Menu.
To transmit the selected call tone :
Sub-code
1. to transmit the selected call tone. The selected tone will
automatically be transmitted for a fixed length of time.
2. PTT to cancel Call Tone.
Auto Power Off
Auto Power Off feature allows you to set the time that the radio
0 - 121
turns off automatically.
1. MENU/GRP button to enter Common Menu. Advance until
"PWR" and the current Auto Power Off time blinks.
2. SEL/
3. or
4. Exit the Menu.
to select.
to the desired call tone.
to select.
to select the time from ON, 1H, 2H, and 3H.
5