Care And Maintenance; Main Unit; Filter; Sensors - Sharp FU-S51E Bedienungsanleitung

CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including the sensor
and filters periodically.
When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet
hands. Electrical shock and/or bodily injury may occur as a result.

MAIN UNIT

Care Cycle 1 month
To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to
remain, they may become hard to clean.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile fluids
Benzene, paint thinner, polishing powder, etc., may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
Keep the unit away from water

FILTER

Care Cycle 2 months
Clean the top surface of the Washable Active
Carbon Filter lightly with a vacuum cleaner.

SENSORS

Care Cycle 2 months
Remove dust from the surface of the hole of the
sensors using a vacuum cleaner.
SENSOR FILTER CARE
(The sensor Filter is in the sensor cover.)
Detach the sensor filter and tap it lightly with your
hand to remove the dust.
If it is very dirty, wash it with water and then allow
it to dry thoroughly.
Washable Active Carbon Filter
(DUST SENSOR, ODOUR SENSOR)
Sensor Cover
Sensor Filter
It does not have a front and
a back.
E-10
Sensor Cover
Hole of Odour Sensor