Hibernating, Suspending Or Logging Off From The Operating System; How To Check Firmware In Admin Mode - iStorage diskAshur PRO2 Benutzerhandbuch

27. Hibernating, Suspending, or Logging off from the Operating Sys tem
Be sure to save and close all the files on your diskAshur PRO
operating system.
It is recommended that you lock the diskAshur PRO
system.
To lock, simply press the 'LOCK' button on the diskAshur PRO
your operating system.
Attention:

28. How to check Firmware in Admin mode

To check the firmware revision number, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin
Mode (solid BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down "3 + 8" until
GREEN and BLUE LEDs blink together
2. Press the "UNLOCK" button and the following happens;
a. All LED's (RED, GREEN
b. RED LED blinks indicating the integral part of the firmware revision number.
c. GREEN LED blinks indicating the fractional part.
d. All LED's (RED, GREEN
e. LEDs return to solid BLUE
For example, if the firmware revision number is '1.2', the
times. Once the sequence has ended the RED,
LED.
manually before hibernating, suspending, or logging off from your
2
To ensure your data is secure, be sure to lock your diskAshur PRO
computer.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
GREEN &
www.istorage-uk.com
before hibernating, suspending, or logging off from the
2
or by clicking the 'Safely Remove Hardware/Eject' icon within
2
Solid BLUE
and BLUE
RED LED will blink once (1) and the
BLUE LED's will blink together once and then return to a solid
if you are away from your
2
LED will change to blinking
LEDs
GREEN LED will blink two (2)
GREEN
BLUE
#23