Changing The Admin Pin - iStorage diskAshur PRO2 Benutzerhandbuch

6. Changing the Admin PIN

PIN requirements:
• Must be between 7-15 digits in length
• Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3)
• Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1)
Password Tip: You can create a memorable word, name, phrase or any other Alphanumerical PIN combination
by simply pressing the key with the corresponding letters on it.
Examples of these types of Alphanumerical PINs are:
• For "Password" you would press the following keys:
7 (pqrs) 2 (abc) 7 (pqrs) 7 (pqrs) 9 (wxyz) 6 (mno) 7 (pqrs) 3 (def)
• For "iStorage" you would press:
4 (ghi) 7 (pqrs) 8 (tuv) 6 (mno) 7 (pqrs) 2 (abc) 4 (ghi) 3 (def)
Using this method, long and easy to remember PINs can be created.
Note: The SHIFT key can be used for additional combinations. SHIFT + 1 is a separate value than just 1.
To create a PIN using additional combinations, press and hold down the SHIFT button whilst entering
your 7-15 digit PIN. e.g. SHIFT + 26756498.
To change the Admin PIN, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode, press and hold down
"UNLOCK + 2" buttons
2. Enter NEW Admin PIN and press "UNLOCK" button
3. Re-enter the NEW Admin PIN and press "UNLOCK"
button
#8
Solid
and solid
Blinking
switch to a single
back to blinking
Blinking
to a rapidly blinking
solid
been successfully changed
www.istorage-uk.com
BLUE LED will change to blinking
BLUE LEDs
GREEN and solid BLUE
GREEN LED blink and then
GREEN and solid
GREEN and solid BLUE
BLUE LED and finally to a
BLUE LED indicating the Admin PIN has
GREEN
LEDs will
BLUE LEDs
LEDs change