Unlocking The Diskashur Pro; Locking The Diskashur Pro; Entering Admin Mode - iStorage diskAshur PRO2 Benutzerhandbuch

3. Unlocking the diskAshur PRO

The diskAshur PRO can be unlocked with either an Admin or User PIN whilst in standby state (solid
2
1. To unlock as the Administrator, enter the Admin PIN and press the "UNLOCK" button.
2. To unlock as a User, first press the "UNLOCK" button (all LEDs,
PIN and press the "UNLOCK" button again.
3. If correct User PIN is entered, both
4. If correct Admin PIN is entered, both
then to the unlocked state, a solid
5. If correct PIN is entered, the drive displays as "iStorage diskAshur PRO
Device Manager".
In an unlocked state (GREEN
RED GREEN
Off Solid
Off Blink

4. Locking the diskAshur PRO

To lock the drive, press the "LOCK" button once or by clicking the 'Safely Remove Hardware/Eject' icon within your operating
system. If data is still being written to the drive, please wait until all data has been written to the drive before pressing the
'LOCK' button or safely ejecting from the Operating System. When the unattended Auto-Lock timeout is activated, the drive
will automatically lock after a predetermined amount of time.
Note: The diskAshur PRO

5. Entering Admin Mode

To enter the Admin Mode, do the following:
1. In standby state (solid RED
down "UNLOCK + 1" buttons
2. Enter the Admin PIN (default - 11223344) and press
"UNLOCK" button
To exist Admin mode, press the "LOCK" button.
GREEN and BLUE
GREEN and BLUE
GREEN LED.
LED), there are two possible behaviours for the LED indicators, shown in the table below.
BLUE diskAshur PRO
Off No data transfer
Off Data transfer in progress
2
cannot be recognized by the operating system in standby state.
2
LED), press and hold
www.istorage-uk.com
2
blink on and off) and then enter the User
LEDs will blink alternately and then return to a solid
LEDs will blink alternately, then to a solid
USB Device" under "Computer Management/
2
2
Solid RED
and BLUE
GREEN
for a few seconds then to a solid
finally a solid
diskAshur PRO
RED LED).
GREEN
BLUE for 1 second and
LED will change to blinking
LEDs
and BLUE LEDs blink rapidly together
GREEN
BLUE LED indicating the
is in "Admin Mode"
2
LED.
GREEN
and
#7