Initialising And Formatting The Diskashur Pro - iStorage diskAshur PRO2 Benutzerhandbuch

24. Initialising and formatting the diskAshur PRO

After a 'Brute Force Attack' or a complete reset of the diskAshur PRO
You will need to initialise and format the diskAshur PRO
To initialise your diskAshur PRO
1. Attach the diskAshur PRO
2. Create a new Admin PIN - see page 12, section 15, 'How to create an Admin PIN after a Brute Force attack or reset'.
3. With the diskAshur PRO
4. Windows 7: Right click Computer and then click Manage and then select Disk Management
Windows 8: Right-click left corner of desktop and select Disk Management
Windows 10: Right click on the start button and select Disk Management
5. In the Computer Manage window, click Disk Management. In the Disk Management window, the diskAshur PRO
recognised as an unknown device that is uninitialised and unallocated.
Note: If the Initialise Disk Wizard window opens, click Cancel.
6. Right-click Unknown Disk, and then select Initialise Disk.
#16
, do the following:
2
to the computer.
2
in standby state (RED LED) enter New Admin PIN to unlock
2
www.istorage-uk.com
will delete all data, encryption key and partition settings.
2
before it can be used.
2
2
(GREEN LED).
is
2