Hibernating, Suspending Or Logging Off From The Operating System; How To Check Firmware In Admin Mode - iStorage diskAshur2 Benutzerhandbuch

30. Hibernating, Suspending, or Logging off from the Operating Sys tem
Be sure to save and close all the files on your diskAshur
operating system.
It is recommended that you lock the diskAshur
system.
To lock, simply press the 'LOCK' button on the diskAshur
operating system.
Attention:

31. How to check Firmware in Admin mode

To check the firmware revision number, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin
Mode (solid BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down "3 + 8" until
GREEN and BLUE LEDs blink together
2. Press the "UNLOCK" button and the following happens;
a. All LED's (RED, GREEN
b. RED LED blinks indicating the integral part of the firmware revision number.
c. GREEN LED blinks indicating the fractional part.
d. All LED's (RED, GREEN
e. LEDs return to solid
For example, if the firmware revision number is '1.2', the
times. Once the sequence has ended the RED,
LED.
#26
manually before hibernating, suspending, or logging off from your
2
To ensure your data is secure, be sure to lock your diskAshur
computer.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
BLUE
GREEN
before hibernating, suspending, or logging off from the
2
or by clicking the 'Safely Remove Hardware/Eject' icon within your
2
Solid
and BLUE
RED LED will blink once (1) and the
& BLUE LED's will blink together once and then return to a solid
www.istorage-uk.com
if you are away from your
2
BLUE LED will change to blinking
LEDs
GREEN LED will blink two (2)
GREEN
BLUE