Hibernating, Suspending Or Logging Off From The Operating System; How To Check Firmware In Admin Mode - iStorage DISKASHUR M2 Benutzerhandbuch

42.
Hibernating, Suspending, or Logging off from the Operating System
Be sure to save and close all the files on your diskAshur M
operating system.
It is recommended that you lock the diskAshur M
system.
To lock the drive, safely eject the diskAshur M
written to the drive, unplugging the diskAshur M
Attention:

43. How to check Firmware in Admin mode

To check the firmware revision number, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down both "3 + 8"
buttons
2. Press the KEY ( ) button once and the following happens;
a. All LED's (RED, GREEN & BLUE) become solid for 1 second.
b. RED LED blinks indicating the integral part of the firmware revision number.
c. GREEN LED blinks indicating the fractional part.
d BLUE LED blinks indicating the last digit of the firmware revision number
e. All LED's (RED, GREEN & BLUE) become solid for 1 second.
f. RED, GREEN & BLUE LEDs switch to a solid
For example, if the firmware revision number is '2.3', the
Once the sequence has ended the RED,
LED.
2
manually before hibernating, suspending, or logging off from your
2
from your host operating system and then unplug from the USB port. If data is being
2
will result in incomplete data transfer and possible data corruption.
2
To ensure your data is secure, be sure to lock your diskAshur M
BLUE LED
RED
GREEN & BLUE LED's will blink together once and then return to Admin mode, a solid
www.istorage-uk.com
before hibernating, suspending, or logging off from the
Solid BLUE
BLUE LEDs
LED will blink twice (2) and the
if you are away from your computer.
2
LED will change to blinking
GREEN LED will blink three (3) times.
GREEN and
BLUE
#35