Brute Force Protection; How To Perform A Complete Reset - iStorage diskAshur PRO2 Benutzerhandbuch

22. Brute Force Protection

If an incorrect PIN is entered 15 (3 x 5 PIN clusters) consecutive times, then all Admin/User PINs, the encryption key and
all data will be deleted and lost forever. The diskAshur PRO
reused.
1. If a PIN is entered incorrectly 5 (five) consecutive times, all LEDs - RED, GREEN,
2. Unplug the drive and re-plug it into the host to get five more PIN attempts. If PIN is incorrectly entered 5 more times, (10
in total - 5 from step 1 and 5 from step 2) all LEDs - RED, GREEN,
3. Unplug the drive, hold down the "SHIFT" button and replug it into the host, all LEDs - RED, GREEN,
and blink together.
4. With all LEDs blinking, enter "47867243" and press the "UNLOCK" button to get 5 final attempts.
Caution:
After 15 consecutive incorrect PIN entries the Brute Force Defence Mechanism activates and deletes
all Admin/User PINs, the encryption key and data. A new Admin PIN must be created, refer to Section
15 on page 12 on
PRO

23. How to perform a complete reset

To perform a complete reset, the diskAshur PRO
Admin/User PINs, the encryption key and all data will be deleted and lost forever and the drive will need to be formatted and
partitioned before it can be reused.
To reset the diskAshur PRO
1. In standby state, press and hold down "0" button
until all LEDs blink alternately on and off
2. Press and hold down "2 + 7" buttons until all LEDs
become solid for a second and then to a solid
Important: After a complete reset a new Admin PIN must be created, refer to Section 15 on page 12 on
Create an Admin PIN after a Brute Force attack or
partitioned and formatted before any new data can be added to the drive.
'How to Create an Admin PIN after a Brute Force attack or
will also need to be partitioned and formatted before any new data can be added to the drive.
2
must be in a standby state (solid
2
proceed with the following steps.
2
RED LED
will then need to be formatted and partitioned before it can be
2
BLUE will light up and become solid again.
Solid
GREEN
off
RED, GREEN
change to all solid for a second and then to a
solid
reset
Reset', the diskAshur PRO
www.istorage-uk.com
BLUE will light up and become solid.
BLUE
Reset', the diskAshur
RED LED). Once the drive is reset then all
RED LED will change to all LEDs, RED,
and BLUE blinking alternately on and
and BLUE alternating LEDs will
RED LED indicating the drive has been
will also need to be
2
will light up
'How to
#15