Advanced Operations; Sleep Timer Setting; Dimmer; Screen Saver - Pioneer DCS-202K Bedienungsanleitung

38 Operation

Advanced Operations

Sleep Timer Setting

Press SLEEP one or more times to select delay
time between 10 and 180 minutes, after the
unit will turn of.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until "SLEEP 10" appears, and then
press SLEEP once again while "SLEEP 10" is
displayed.
NOTE
You can check the remaining time before the
4
unit turns of.

Dimmer

Press DIMMER once. The display changes
among three levels of brightness. To cancel it,
press DIMMER repeatedly until dim of.

Screen Saver

The screen saver appears when you leave the
unit in Stop mode for about ive minutes.

Turn of the sound temporarily

Press MUTE to mute your unit.
You can mute your unit, for example, to answer
the telephone, the "MUTE" displayed in the
display window.

System Select - Optional

You must select the appropriate system mode
for your TV system. If "NO DISC" appears in the
display window, press and hold PAUSE/STEP
(X) for more than ive seconds to be able to
select a system. (PAL/ NTSC)

Displaying ile information

(ID3 TAG )

While playing an MP3 ile containing ile
information, you can display the information
by pressing DISPLAY.
Listening to music from your
portable player or external
device
The unit can be used to play the music from
many types of portable player or external
devices. (Refer to the page 24)
1. Connect the portable player to the
PORTABLE IN connector of the unit.
Connect the external device to the AUX
connector of the unit.
2 Turn the power on by pressing STANDBY/
ON.
3 Select the PORTABLE or AUX function by
pressing FUNCTION.
4 Turn the portable player or external device
and start it playing.
Or