Further Programming Functions - AUDIOLINE DECT 7501 micro Bedienungsanleitung

7.2

Further programming functions

The following functions are available in this menu:
1/3 Enter network type
2/3 Change FLASH time
3/3 Insert automatic pause
Programming steps
1. Press the
two presses of the
2. Confirm with
3. You can now set the required
network type between A and D with
the ( ) and
4. Confirm with
5. The required FLASH time of 84ms
(private exchanges) or 270ms (T-
NET) can be set here with the
( ) and
6. Confirm with
7. You can now set whether the
automatic pause is to be used with
the ( ) and
8. Confirm with
9. Exit programming with the
button.
All manuals and user guides at all-guides.com
- Special functions -
button followed by
( ) button.
.
( ) buttons.
.
( ) buttons.
.
( ) buttons.
.
Indication in the display
The symbol flashes
1/5 3 – B – C- or D
1/3 A
The standard setting here is A and
is designed for the public telephone
network. If there should be
problems with the volume when
connected to private exchanges, try
the other settings B, C and D.
2/3 current FLASH time, e.g.
2/3
***
84ms =
***
270ms =
******
3/3 automatic pause e.g. NO
3/3
NO
YES
1/3A – B – C- or D
***
51