Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Thank you for purchasing this peerless EMPHASER amplifier!
To maximize the performance of this amplifier and your complete car audio system install, we
recommend that you acquaint yourself thoroughly with all technical features and controlling
options of this EMPHASER amplifier. Please read this manual carefully, before attempting
the installation.
If, after reading this manual, you still have questions regarding functions or the installation of
the amplifier, we recommend that you consult your dealer.
KEY FEATURES
EA-MT1
■ 1-CH Class-D Full-Range Amplifier for 4/2 Ohm Mono Operation
■ Adjustable 12 dB/octave LP and Subsonic X-Over
■ Remote Control included
■ Bass Boost
■ Protection Circuit
EA-MT4
■ 4-CH Class-D Amp for 4/2 Ohm Stereo Operation
■ Bridge Operation into 4 Ohm
■ Adjustable 12 dB/octave HP and BP X-Over
■ Extended X-Over range for 2-way active speaker setup
■ Protection Circuit
2
TECHNICAL SPECIFICATIONS
Model
EA-MT1
Number of Channels
1
Rated Power Output (RMS)
450 W x 1
At 4 Ohms / 14.4V (THD<= 0.1%)
Rated Power Output (RMS)
600 W x 1
At 2 Ohms / 14.4V (THD<=1.0%)
Rated Power Output (RMS)
Bridged, 4 Ohms / 14.4V
n.a.
(THD<=1.0%)
Damping Factor
> 400
4 Ohms/100Hz
Signal-to-Noise Ratio
> 90 dB
(All channels)
Frequency Response
10 Hz - 500 Hz
(x-over set to FULL)
Channel Separation
n.a.
Input Sensitivity
0.35 – 10 V
Integrated X-Over
12 dB/Oct.
Slope Rates HPF / LPF
Cross-Over Frequency:
High Pass
15 - 40 Hz
Low Pass
50 - 500 Hz
Maximum Current Draw
70 A
Dimensions (W x H x D)
212 x 35 x 110 mm
EA-MT4
4
100 W x 4
150 W x 4
320 W x 2
> 400
> 90 dB
10 Hz - 40 kHz
> 60 dB
0.35 – 10 V
12 dB/Oct.
20 - 4000 Hz
50 - 5000 Hz
70 A
212 x 35 x 110 mm
3
Werbung
Inhaltsverzeichnis
