Personal Protective Equipment; Product Description; Identification; General Description - HEYLO IRE 3 Betriebsanleitung

– The device must not be covered with textiles
(e.g. curtains) or other objects.
– Place the device in an upright position and en-
sure that it cannot topple over.
– Connect the device to a power mains with a
voltage that corresponds to the one specified on
the type plate.
– Only use extension cords that meet the perfor-
mance data on the type plate, as there is other-
wise a risk of overload.
Keep extension cables as short as possible and
only ever use them when they are fully extend-
ed.
– Connect the device to a power socket that is
earthed or protected by an integrated RC circuit
breaker.
– Only ever operate one device from one socket to
prevent overloading.
– Do not switch the device on automatically with a
timer or similar device.
– During operation, monitor the device and keep
children and pets at a safe distance.
Handling
The following rules apply to handling the device:
– Handle the device with care. Do not drop or
throw the device, and do not transport while un-
secured.
– Use only original spare parts or parts approved
by the manufacturer.
– The device must not be operated by persons
under the influence of alcohol, drugs or medica-
tion.
13.3

Personal protective equipment

Personal protective equipment serves to protect staff
against any hazards that could affect their safety or
health at work.
The following personal protective equipment must
be worn during transport and installation:
– Protective gloves to prevent hands becoming
crushed or trapped
– Safety footwear to prevent injury from impact or
tripping
14

Product description

The device is a lightweight, portable unit that pro-
duces radiation heat. The device is suitable for spot
heating (e.g. of machines or workplaces) and for
heating enclosed spaces (e.g. warehouses, work-
shops, construction sites, greenhouses).
EN
14.1

Identification

The device can be clearly identified by means of the
rating plate on the rear of the device housing.
Type plate
Elektro Heizer
Electric Heater
IRE 3
220-240V~ / 50Hz
2400W
Art.Nr.
Seriennummer:
The type plate contains the following information:
– Model
– Type number
– Electrical connection data
– Serial number
14.2

General description

The device is a compact and portable unit that pro-
duces radiation heat.
The device must only be operated:
– for the purpose for which it is intended
– in compliance with the safety instructions in
chapter Safety [ 17]
Assembly, scope of delivery and
accessories
6
5
3
Fig. 6: Heater
1 Carry handle
3 Base
5 Infrared heating rod
Heater IRE 3
HEYLO GmbH
Im Finigen 9
28832 Achim
GERMANY
Telefon: +49 (0) 4202-9755-0
IP20
2 202 900
www.HEYLO.de
info@heylo.de
1
2
3
4
2 Housing
4 Heating output swit-
ches
6 Protective grille
19 / 26