Bluetooth - Audio - Kenwood KDC-BT460U Bedienungsanleitung

Bluetooth®
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears on the display.
2
Search and select the name of your receiver ("KDC-BT460U") on the
Bluetooth device.
3 Operate the Bluetooth device to confirm pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold B SRC to turn off the unit.
Bluetooth — Audio
• Operations and display indications may differ according to their availability
on the connected device.
• Depending on the connected device, some features may not work with
your device.
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
Press B SRC repeatedly to select BT AUDIO.
1
• Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
On the faceplate
Press 6 IW.
Press 2 / 1 .
Press S / T.
Press and hold S / T.
Press 4 repeatedly.
[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT],
[REPEAT OFF]
Press and hold 3 to select [ALL RANDOM]
or [GROUP RANDOM].
• Press 3 to select [RANDOM OFF].
Refer to "Select a file to play" on page 9
Press 5.
(Pressing the "Play" key on the connected
device itself also causes switching of sound
output from the device.)
ENGLISH
15