Inhaltsverzeichnis
Werbung
Connecting Up
2
Easy Setup
This easy setup is the minimum set of connections you
need to start watching DVD video discs. Both sound and
picture are fed directly to your TV using the supplied
audio and video cables. For other possible connections,
see pages 28 and 32.
Important
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
2
Connecting audio and video cables
Be sure to insert each plug fully for
the best connection. The plugs and
jacks are colour-coded to make
connection easier.
Connecting control cables
Use a stereo mini-plug cable (not supplied) to connect the
CONTROL OUT of your Pioneer amplifier/receiver to the
CONTROL IN of this unit. This allows you to operate this
unit with the amplifier/receiver's remote control. See the
instruction manual that came with your amplifier/receiver
for more detailed instructions. Add more components to
the chain by connecting the CONTROL OUT of this unit
to the CONTROL IN of other Pioneer components.
24
En
All manuals and user guides at all-guides.com
1
Connect to a composite video input on
your TV using the supplied yellow video
cable.
AV CONNECTOR 2
COMPONENT VIDEO OUT
1
1
Y
P
P
B
R
2
2
S-VIDEO
VIDEO
OUT
OUT
Connect to a pair of stereo audio inputs on
your TV using the supplied red/white stereo
audio cable.
AV CONNECTOR 1 (RGB)-TV
1
2
CENTER
L
IN
L
R
OUT
R
CONTROL
OPTICAL
COAXIAL
SUB
FRONT
SURROUND
WOOFER
AUDIO OUT
DIGITAL OUT
(2CH)
AUDIO OUT
(5.1CH)
3
Plug into a standard AC
wall outlet.
Important
• In order to properly ground this player, you must connect
at least one audio or video cable (not including an optical
cable) in addition to the control cable.
• If the CONTROL IN jack on the player's rear panel is
connected to the CONTROL OUT jack of another
Pioneer component, point the remote control at the other
component to operate the player.
AC IN
Werbung
Inhaltsverzeichnis
Fehlerbehebung
