Drainage Instructions - be cool BC9KL2201FW Bedienungsanleitung

Timer
When the unit is in standby, first press TIMER button to go to delay stop setting (from 1h
to 24h), until the indicator LED lights. The display will blink.
When the air conditioner is running, press the TIMER button, the timer indicator
LEDis on, and the display will blink.
Manual drainage
If the water compartment is full, the
machine will stop -> turn off the machine
and unplug.
Note: please move the machine care-
fully, so as not to spill the water in the
water tray at the bottom of the unit.
Place a water container below the wa-
ter outlet at the back of the unit.
Unscrew the drain cover and open the
water plug, the water will automatically
flow into the water container.
Notes:
Keep the drain cover and the water plug within reach.
During drainage, the unit can be tilted slightly backwards.
If the water container should be too small to hold all the water, stuff the water outlet
with the water plug as soon as possible to prevent water from flowing onto the floor
or the carpet.
When the water is discharged, put the water plug back in, and tighten the drainage
cover.
Note:
restart the machine only after the water plug and the drainage cover are securely
tightened, otherwise the condensate water of the machine will flow onto the floor or the
carpet.

DRAINAGE INSTRUCTIONS

S. 24