Maintenance; Spare Parts And Consumables; Checking And Cleaning - Vorwerk Kobold EBB100 Gebrauchsanleitung

CAUTION
Risk of injury from moving parts!
Moving parts (such as the rotating brushes or oscillating cloth holder) could cause
injury.
• Always switch the device off before all retrofitting, cleaning and maintenance
work.
• Disconnect the accessory head from the device before performing retrofitting,
cleaning or maintenance work on the accessory head.
• Stay clear of the moving parts.
• Never reach into the rotating components.
8

Maintenance

8.1

Spare parts and consumables

We recommend you take advantage of our reorder options for
original care products and original consumables in good time. For
more information on the reorder options, see the chapter Service.
8.2
Maintenance
8.2.1

Checking and cleaning

1. Check the underside every once in a while to prevent damage to
the device and floor.
2. Perform visual inspections from time to time in order to detect
defects or very dirty areas.
3. Remove any dirt. Remove any hair or fibres that are coiled around
the small rollers at the front and check that the rollers rotate
freely.
4. If threads are coiled around the roller brushes, these can simply
be cut with a pair of scissors (1) and removed.
5. If a substantial amount of material is coiled around the brushes,
remove the brushes (see chapter
[} 36]") before clearing away the threads.
"Changing the roller brushes
35