Operation; Attaching The Accessory Head; Brush Modes - Vorwerk Kobold EBB100 Gebrauchsanleitung

6

Operation

6.1

Attaching the accessory head

1. Connect the attachment socket (1) of the cordless vacuum
cleaner to the pivot on the electric brush (2)
2. Make sure you hear the attachment socket click into the pivot.
3. To remove the electric brush from the cordless vacuum cleaner,
press the button (3) located at the bottom of the suction piece.
Once it is unlocked, you can remove the electric brush from the
cordless vacuum cleaner.
6.2

Brush modes

There are three operating modes for cleaning floors with the Kobold
EBB100 Electric Brush. The selected operating mode is shown on the
electric brush:
Brush mode
Normal mode
(1)
The brushes rotate at normal
speed. This is the start-up
mode.
Particularly suitable for hard
floors or for gentle brush-
suction.
(2) Turbo mode
The brushes rotate at a higher
speed.
Particularly suitable for
carpets or very dirty areas.
(3) Brushes deactivated
The brushes do not rotate.
Suitable for particularly thick
or deep-pile carpets.
(4) Fault: the brushes are blocked.
For more information, see
chapter
[} 37]".
Note We recommend normal mode for hard floors.
We recommend turbo mode for a particularlythorough clean and for
vacuuming pet hair.
"Troubleshooting
LED display
One white LED is lit.
Two white LEDs are lit.
LEDs have gone out.
Both LEDs flash red.
31