M-system attila PRDK 1050 Gebrauchsanweisung Und Installationsanleitung Seite 131

INSIDE OF OVEN
This must be cleaned regularly.
Remove and refit the side runner frames
as described on the next chapter.
With the oven warm, wipe the inside
walls with a cloth soaked in very hot
soapy water or another suitable product.
Side runner frames, tray, lower panel
and rack can be removed and washed
in the sink.
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
– Fit the side runner frames into the
– Slide the tray and rack into the run-
– To dismantle, operate in reverse
Fig. 7.3
Fig. 7.4
holes on the side walls inside the
oven (Fig. 7.3).
ners (Fig. 7.4).
The rack must be fitted so that the
safety catch, which stops it sliding out,
faces the inside of the oven (fig. 7.4).
order.
131