Operational Anomalies; After Sales Service - De Dietrich DHD9001X Betriebsanleitung

5/ OPERATIONAL ANOMALIES

SYMPTOM
The hood does not
work...
The hood has low ou-
tput...
The cooker hood does
not close again.
In case of malfunctioning, after all the After-Sale service works, it is necessary to carry out the
cooker hood calibration again .

6/ AFTER SALES SERVICE

Any maintenance on your equipment should be undertaken by:
- either your dealer,
- or another qualified mechanic who is an authorized agent for the brand appliances.
When making an appointment, state the full reference of your equipment (model, type and
serial number). This information appears on the manufacturer's nameplate attached to your
equipment.
Check that:
• there is not a power outage.
• a specific speed has actually been selected.
• the red button, of the separate body, is inserted properly.
• the cooker hood height exceeds 18 cm.
• the central panel has been repositioned properly.
• The non-return valve moves freely.
• The air suctioned is discharged properly from the cabinet.
Check that:
• the motor speed selected is sufficient for the quantity of fumes
steam present.
• the kitchen is ventilated well enough to allow for air intake.
• the charcoal filter has not been used (filtering mode version).
• the grease filter is not saturated.
• the minimum distance between the cooker hood and the cook
top has not been exceeded,
• this cooker hood is suitable for your kitchen dimensions.
Check that:
• an obstacle prevents the appliance from being closed
completely.
37
SOLUTION
EN
EN