The Control Panel - IKEA TILLREDA AA-2326089-2 Bedienungsanleitung

7. THE CONTROL PANEL

1. On/Off button
2. Program Selection Button
3. Display
4. Delay Button
5. Options Button
i. Energy Save Indicator
ii. Half Load Indicator
iii. Salt Indicator
iV. Rinse Aid Indicator
1. On/Off Button
Switch the machine on by pressing On /
Off button. When machine is on, "--" will
be shown on the Display (3).
2. Program Selection Button
Select a suitable programme for your
dishes by pressing Program Selection
button. The programme will start
automatically when the door is closed.
3. Display
The Display shows the number and
total time of the selected programme
alternately and the remaining time
during operation.
4. Delay Button
Press the Delay button to delay the start
time of the selected programme for 1
hour up to 19 hours. Pressing the button
once delays the start time for 1 hour,
and continuing to press will increase the
delay time. Press the Delay button to
change or cancel the delayed start. If you
switch off the machine while delay timer
is active, the delayed time is cancelled.
5. Options Button
Press the Options button to activate the
Energy Save option. Select the Energy
Save option to enable the door of the
machine to open at the end of the
programme to increase drying efficiency.
This function also saves energy by
operating at a lower temperature. The
Energy Save Indicator (i) will illuminate.
Press the Options button twice to reduce
the duration of the selected programme,
and therefore decrease the energy and
water consumption. When Half Load
option is selected, Half Load Indicator (ii)
will illuminate.
Press the Options button three times to
activate the Energy Save and Half Load
options together. Energy Save (i) and Half
Load (ii) indicators will illuminate.
NOTE: If you decide not to start
the selected programme, please see
the "Changing a Programme" and
"Cancelling a Programme" sections.
NOTE: When there is insufficient
softening salt, the Salt Lack Warning
Indicator (iii) will illuminate to indicate
the salt chamber needs filling.
NOTE: When there is insufficient
rinse aid, the Rinse Aid Lack Warning
Indicator (iv) will illuminate to indicate
the rinse aid chamber needs filling.
EN - 19