IKEA TILLREDA AA-2326089-2 Bedienungsanleitung Seite 31

AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE
CODE
Water inlet system failure
FF
Pressure system failure
F5
Continuous water input
F3
Inability to discharge water
F2
F8
F1
FE
F7
F9
F6
HI
LO
The installation and repairing procedures should always carried out by the Authorised
Service Agent in order to avoid possible risks. The manufacturer shall not be held
liable for damages that may arise from procedures carried out by unauthorised
persons. Repairs may be carried out by technicians only. If a component has to be
replaced, ensure that only original spare parts are used.
Improper repairs or use of non-original spare parts may cause considerable damage
and put the user at considerable risk.
POSSIBLE FAULT
Heater error
Overflow
Faulty electronic card
Overheating
Divisor position error
Faulty heater sensor
High voltage failure
Low voltage failure
Make sure the water inlet tap is open and water is
Separate the inlet hose from the tap and clean the filter
Contact for service if the error continues.
Contact for service.
Close the tap and contact for service.
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
Contact for service.
Unplug the machine and close the tap.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
GB - 26
WHAT TO DO
flowing.
of the hose.