The Control Panel - IKEA TALLBODA AA-2326095-4 Bedienungsanleitung

7. THE CONTROL PANEL

3 1 2
1. On/Off button
2. Programme button
3. Display
4. Half Load button
i. Upper Basket - Half Load led
ii. Lower Basket - Half Load led
5. Delay button
6. Options button
iii. Energy Save led
iv. Extra Dry led
v. Extra Silent led
7. Salt lack warning indicator
8. Rinse Aid lack warning indicator
1. On/Off Button
Turn the machine on by pressing On/Off
button. When machine is on, "--" will be
shown on the Display (3).
2. Programme Button
Select a suitable programme for your
dishes by pressing Programme button.
The programme will start automatically
when the door is closed.
3. Display
The Display shows the number and
duration of the selected programme
alternately and the remaining time
during operation.
4. Half Load Button
Press the Half Load button to select the
area of the dishwasher that contains the
dishes to be washed. You can select both
baskets, the upper basket only, or the
lower basket only. Press the button until
the led (i,ii) corresponding to the basket
contaning the dishes to be washed
illuminates. Dishes in other areas will not
be washed.
İİİ
İ İİ
7
v
8
4 5 6 iv
5. Delay Button
Press the Delay Start button to delay the
start time of a programme for 1 hour up
to 19 hours. Pressing once will delay the
start time for 1 hour, and continuing to
press the button will increase the delay
duration. Press the Delay button to
change or cancel the delayed start. If you
turn off the machine after activating the
delay time, the delayed time is cancelled.
6. Options Button
Press the Options button once to activate
the Energy Save option. Select the
Energy Save option to enable the door
of the machine to open at the end of the
programme to increase drying efficiency.
This function also saves energy by
operating at a lower temperature. Energy
Save led (iii) will illuminate.
Press the Options button twice to
activate the Extra Dry option. Select Extra
Dry option to add extra drying steps to
a programme in order to obtain drier
dishes. This option increases water
temperature of the final rinse step and
duration of the drying step. Extra Dry led
(iv) will illuminate.
Press the Options button three times to
activate the Extra Silent option. Select
Extra Silent option to decrease the water
pressure, therefore providing a more
sensitive and silent wash. This option
can only be selected at the beginning
of a programme. Extra Silent led (v) will
illuminate.
NOTE: If an extra feature has
been used on the most recent wash
programme, this feature will remain
active on the next selected programme.
To cancel this feature on the newly
selected wash programme, press the
feature button until the light on the
button switches off.
7. Salt lack warning indicator
When there is insufficient softening
salt, the Salt Lack Warning Indicator will
illuminate to indicate the salt chamber
needs filling.
8. Rinse Aid lack warning indicator
When there is insufficient rinse aid,
GB - 19