Other Information - IARP F300 Betriebsanleitung

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
11. INSTRUCTIONS FOR DISASSEMBLY
It is necessary to contact professional operators for the disassembly.
Gruppo Epta, which has always been particularly environmentally conscious, makes available to users the manuals for dismantling and
waste handling of the plug-in chilled cabinets, which can be downloaded below.
• Manual to dismantle open plug-in cabinets
https://www.eptarefrigeration.com/sites/default/files /disassembly_manual_open_cabinets_epta.pdf
• Manual to dismantle closed plug-in cabinets
https://www.eptarefrigeration.com/sites/default/files/disassembly_manual_closed_cabinets_epta.pdf

12. OTHER INFORMATION

For further and more detailed information, please refer to: www.eptarefrigeration.com and to EPREL https://ec.europa.eu/
info/energy-climate-change-environment/standards-tools-and-labels/products-labelling-rules-and-requirements/
energy-label-and-ecodesign/product-database_en (you can access this directly through the QR code here and in the product
energy label).
13. CHOICE OF THE INSTALLATION SITE
In selecting the place of installation, ensure that the following instructions are observed, this being vital for proper and troublefree
working of the cabinet:
• Do not install the cabinet in the vicinity of heating radiators or other heat sources.
• Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
• Do not expose the refrigeration unit to air currents from fans, open doors, conditioning units.
• Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons and other obstacles.
• It is necessary taht the condensing unit obtains a good circulation of air around it; also the area around the condensing unit should
not be obstructed by boxes or other objects; keep a distance from the wall of 10 cm. at least.
14. PROLONGED SWITCH OFF
• When the unit is not used for a long time, please take note of the following procedures:
• Unplug the unit;
• Clean and dry the tank well;
• Leave the glass covers open to avoid possible formation of bad odours;
• Cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric agents.
15. USE
THE APPLIANCE IS SUITABLE FOR FREEZING PRE-PACKAGED PRODUCE.
THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-PACKAGED
PRODUCTS. THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-
PACKAGED PRODUCTS.
THE APPLIANCE CANNOT BE USED FOR THE PRESERVATION OF PHARMACEUTICALS.
The manufacturer cannot be held liable for damage caused by people, property or the equipment itself due to display of products other
than the afore-specified.
F300 - F400 - F500
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
1 5 / 4 8
PAGE
N° DOC
Air-Condi�on