Fitting Eyeglass Strap Br124, Br126, Br330; Dosimeter Holder Br130, Br330 - MAVIG BR115 Gebrauchsanweisung

Intended Use
4.0 Intended Use
4.2 Fitting Eyeglass Strap BR124, BR126, BR330
All models of the radiation protection glasses are supplied with a strap. With the series BR126,
BR133 (see assembly BR133) and BR330, the eyeglass strap should be attached to the glasses
before initial use. For all other models, the strap is already fitted.
BR124 The rubberised ends of the strap must be pushed at least 2 cm over each eyeglass side piece.
Make sure that the strap is securely attached to the glasses by pulling on it.
BR126 The rubberised ends of the strap must be pushed at least 2 cm over each eyeglass side piece.
Make sure that the strap is securely attached to the glasses by pulling on it.
BR330 The eyeglass strap is hooked into the side groove. To do this, the locking latch at the end
of the eyeglass strap is inserted in the lateral groove of the bracket and then rotated by 90°.
Make sure that the eyeglass strap is firmly attached to the glasses by pulling on it.
4.3

Dosimeter Holder BR130, BR330

The BR130 and BR330 models provides the option of carrying up to two eye lens dosimeters.
Eye lens dosimeters will be provided by personal dosimeter monitoring facilities and are intended
for use in the BR130 resp. BR330.
The eye lens dosimeters must be installed and removed from the BR130 resp. BR330 in accordance
with the specifications of the responsible personal dosimeter monitoring facility.
Eye lens dosimeters which are not intended for use in the BR130 resp. BR330 should not be used
in the BR130 resp. BR330 as both the eye lens dosimeter and the glasses may be damaged during
installation and/or while they are being worn.
It is not possible to change the number of dosimeter holders.
30