Product Description - CONDTROL XLiner 360 G Bedienungsanleitung

EN
CROSS LINE LASER
- Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.

PRODUCT DESCRIPTION

Cross line laser XLiner 360 G / COMBO 360 G CONDTROL is intended to
project vertical and horizontal lines. The laser level is suitable for use
at both indoor and outdoor building areas.
The laser level has 2 operating modes:
- automatic leveling
and lines. Leveling function allows to automatically compensate
irregularities within self-leveling range of ±3,5°;
- locked compensator, to build inclined planes and lines;
Pulse mode allows using laser receiver to increase working range of
the laser level or to work when laser is hard to be defined in bright
lighting conditions.
XLiner 360 G / COMBO 360 G
to project horizontal and vertical planes
user manual
5 5