Product Description - CONDTROL NEO X200 Bedienungsanleitung

CROSS
EN
LINE LASER
- Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.

PRODUCT DESCRIPTION

Cross line laser NEO X200 CONDTROL is intended to build and check
vertical and horizontal planes and lines.
The product has 2 operating modes:
- locked compensator, to build inclined planes and lines;
- automatic levelling to project horizontal and vertical planes
and lines. Levelling function allows to automatically compensate
irregularities within self-levelling range of ±4,5°.
Pulse mode allows using laser receiver to increase working range of
the instrument or to work when laser is hard to be defined in bright
lighting conditions.
CONDTROL NEO X200
user manual
5 5