12. Troubleshooting
The device you have purchased is a product that has been designed according to the state of the
art and is reliable in operation.
However, problems and malfunctions may still occur.
This section tells you how to troubleshoot common issues:
Always observe the safety information in these instructions!
Fault
The device does not work.
Wrong output values
Any repair work other than that described above must be carried out by an authorised
technician.
If you have questions about the device, please contact our technical support team.
13. Specifications
Display ............................................200,000 counts
Operating voltage ...........................9 V/DC (9 V block battery, e.g. 6LR61)
Automatic power-off ........................ approx. 30 minutes, can be manually adjusted and
Operating temperature ...................0 to 50 °C
Storage temperature .......................-20 to +70 °C
Relative humidity ............................0 to 30 °C: ≤75%; 30 to 40 °C: ≤50%
Operating altitude ...........................0 to 2000 m
Weight ............................................approx. 370 g
Dimensions (L x W x H mm) ...........193 x 96 x 47
54
Possible cause
Is the battery empty?
Is the battery empty?
disabled
Solution
Check the status. Replace
the batteries.
Check the status. Replace
the batteries.