Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Item No.
Designation
1
Display
2
"RTD/ESC" button
3
"V/Ω" button
.
4
Power button
5
"▲/25%" button
.
6
"◄/0%" button
7
"4W" socket
8
"V/mV/Ω/TC/RTD"
socket
9
"COM" socket
10
"3W" socket
36
Description
Briefly pressing the button (<1.5 s) switches to
resistance temperature detector mode or changes the
sensor type.
Pressing and holding the button (>1.5 s) resets the
settings to the factory defaults or restores automatic
temperature compensation.
Briefly pressing the button (<1.5 s) switches to volt-
age/resistance output mode.
Pressing and holding the button (>1.5 s) shows the
resistance value in "RTD" mode and the voltage value
in "TC" mode for approx. 3 s.
Pressing and holding the button (>1.5 s) turns the
device on or off.
Briefly pressing the button (<1.5 s) switches the
display illumination on and off during operation.
Briefly pressing the button (<1.5 s) increases the
current numeric value of the selected decimal place
by 1 point.
Pressing and holding the button (>1.5 s) increases
the numeric value by 25% of the entire current range
(voltage/resistance/temperature).
Briefly pressing the button (<1.5 s) moves the
selected decimal place to the left.
Pressing and holding the button (>1.5 s) decreases
the numeric value to 0% of the entire current range
(voltage/resistance/temperature).
Connection socket for 4-wire resistance operation.
Connection socket for signal output (positive pole)
Connection socket for reference point (negative pole)
Connection socket for 3-wire resistance operation
(and 4-wire for 4-wire operation).
Werbung
Inhaltsverzeichnis
