Output function
Wre526
Wre325
Pt10
PT100
Cu50
Cu100
b) Automatic ramp function
The calibrator enables automatic output of the output values using the ramp function. It enables
to carry out linear tests very easily. Ranges are output continuously from 0% - 100% - 0%.
There are three modes available:
0% - 100% - 0%, smooth ramp, rise/fall time 40 s
0% - 100% - 0%, smooth ramp, rise/fall time 15 s
0% - 100% - 0%, step ramp with 25% increments, 5-second pause after each incre-
ment
To enable this function, briefly press the "
the next ramp function.
Pressing and holding down the "
c) Turning the display illumination on and off
Briefly pressing the power button (4) turns the display illumination on and off.
0% value
0.0 °C
0.0 °C
0.0 °C
0.0 °C
0.0 °C
0.0 °C
" button (15) (>1.5 s) disables the function.
100% value
2000.0 °C
2000.0 °C
500.0 °C
400.0 °C
150.0 °C
150.0 °C
" button (15). Each keystroke switches to
49