Using Your Smart Purifier; Sleep Mode - Levoit VeSync Core 600S Bedienungsanleitung

U S I N G YO U R S M A R T
A I R P U R I F I E R
Note: Using the VeSync app allows you to control
your air purifier remotely and access additional
functions and features (see page 15).
1. Plug in and tap
purifier. [Figure 2.1]
2. Optionally, tap
between low, medium, high, and turbo.
Note:
•
The fan speed indicators will light up
when active. 1 indicator will light up for
low, 2 for medium, 3 for high, and 4 for
turbo.
•
Turbo speed is the loudest, but cleans
air the quickest.
•
For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at turbo speed for 15–20
minutes before using a lower speed.
•
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
3. Tap to turn off the air purifier.
Figure 2.1
to turn on the air
to change fan speed

Sleep Mode

Sleep Mode operates quietly by using a fan
speed lower than low speed.
1. Tap to turn Sleep Mode on/off.
2. Sleep Mode will turn off the display after
6 seconds if no other buttons are tapped.
Note:
•
When the display is turned off, tap any
button (except
back on. If you don't tap another
button, the display will turn off again
after 6 seconds.
•
The Check Filter Indicator will still turn
on and stay on if it's time to check your
filter (see page 18).
) to turn the display
EN
11