Herunterladen Diese Seite drucken

SQlab ERGOWAVE Montage- Und Einstellanleitung Seite 2

Sattelhöhe

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ERGOWAVE
Saddle height
Standard saddle
Please note: the SQlab ERGOWAVE® saddles 6OX, 611 and 612 can build up higher due to the raised seat surface.
Saddle slope
recommended inclination
Begin by positioning the saddle nose horizontally or pointing slightly upward.
The nose can be sloped slightly upwards for increased comfort.
If pressure is felt in the perineal area, lower the saddle nose slightly.
Saddle fore & aft positioning
Standard saddle
Sitting position
SQlab ERGOWAVE® active saddles should be mounted slightly further forward than conventional saddles.
It is important that the seat bones of the ERGOWAVE® models rest on the middle step, at the widest point of the saddle.
A seat post without offset is recommended.
No general statement can be made for the offset of the 613R, since frame geometries and seatposts in triathlon differ greatly from each other.
Saddle clamp
The saddle must always be mounted within the marked clamping area.
The saddle should never be pushed all the way back inside the clamp. The large leverage effect can damage the rails.
Pay attention to the torque specified by the seatpost manufacturer.
The clamp should also be at least 32 mm long.
Please follow the operating instructions provided on the Internet for the installation and use of your SQlab product.
SQlab GmbH
Postweg 4
Sports Ergonomics
82024 Taufkirchen
www.sq-lab.com
Germany
Adjustment Advice
®
SQlab ERGOWAVE
SQlab ERGOWAVE
Sitting position
Phone +49 (0)89 - 666 10 46-0
Fax
+49 (0)89 - 666 10 46-18
E-Mail: info@sq-lab.com
®
®
SQlab ERGOWAVE
R
®
SQlab ERGOWAVE
®
R
Sitting position

Werbung

loading