Philips FC8802 Bedienungsanleitung Seite 10

ENGLISH
10
Charging
1
2
3
4
Note: It is possible that the on/off switch is still in 'on' position while charging. In that case, the robot will
not work when you press the on/off switch once to start a new cleaning run. You have to press the on/off
switch a second time to switch on the robot.
Preparing for cleaning
1
2
Note: The robot does not operate when it is connected to the mains. Therefore, always disconnect the
adapter from the robot and the mains before use.
Note: Always store the adapter in a safe place before you switch on the robot.
3
4
or rugs to see how it is coping.
Cleaning
1
detect a staircase or height difference in time.
,
2
beeps. Recharge the robot to continue cleaning (see chapter 'Preparing for use', section
'Charging') (Fig. 14).