2.10 Completion Of Work - ATH-Heinl Cross Lift 35 OG Bedienungsanleitung

14.1 TO LOWER WHEEL FREE JACKS MANUALLY
a. Set the MAIN/JACK selector to "
d. Manually activate the pneumatic valve or mechanically block the safety catches so that they cannot
engage.
After manual lowering of the lift, reset ordinary operating conditions. Lift
cannot be lifted if unloading valve is opened.

2.10 Completion of Work

Before commissioning, check all fastening screws, electrical, pneumatic and hydraulic
lines and, if necessary, tighten these. Warning: in some cases, this must be checked at
regular intervals and tightened if necessary (note in the instructions).
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-11
";
Manufacturer ATH-Heinl GmbH & CO.KG
- 35 -