Operation - ATH-Heinl Cross Lift 35 OG Bedienungsanleitung

1.3

Operation

Lockable main switch with emergency stop function
to switch the lift on and off and to prevent the lift from being operated by unauthorized persons.
Selector switch
Choice between two drive variants
Position : The circuit of the lifting platform is supplied with power for operation
Position : The circuit of the wheel-free jack is supplied with power for operation
Lift button
to lift
Lowering button
After pressing the button for approx. 1-2 seconds, the safety detents are unlocked and then
lowered.
When the CE stop is reached, an additional acoustic signal is generated.
Parking button
to park the lift in safety detents. Depending on the setting of the selector switch, either the main
lift or the wheel-free jack is actuated.
Setting or work switch
Position: WORK indicates that the lift is in normal operation.
Position: ADJ indicates that the lift is in setting mode
Switch for light barrier
Bridging of the light barrier for setting or installation measures
Beeper
gives an acoustic and optical signal after reaching the CE stop
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-11
Manufacturer ATH-Heinl GmbH & CO.KG
- 8 -