ATH-Heinl Cross Lift 35 OG Bedienungsanleitung Seite 67

Cross Lift 35 OGA
Platform P1 Main lift
Platform P2 Main lift
Wheel-free jack
This enables additional lifting of the vehicle at the sill.
Base frame
This is used for mounting the lifting unit.
Pair of scissors
Follow-on hydraulic cylinder (P2)
Main hydraulic cylinder (P1)
Auxiliary hydraulic cylinder (CL35)
Light barrier
Ensure safe synchronization of the two scissors
Safety catches on main and wheel-free jack.
This device prevents, in case of any defect, the lowering of the platform by more than 100 mm.
Pneumatic cylinders unlock the device every time a lowering is performed.
Control box
Contains the complete electrical control system. All pushbuttons are protected by a front ring to
prevent unintentional actuation of the pushbutton. Furthermore, all movements are immediately
interrupted when the pushbuttons are released (dead-man control).
Hydraulic power unit included
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-11
Manufacturer ATH-Heinl GmbH & CO.KG
- 6 -