Maintenance; Belt Adjustment - HMS LOOP13 Bedienungsanleitung

MAINTENANCE

Proper maintenance is very important to ensure a faultless and operational condition of the
treadmill. Improper maintenance can cause damage to the treadmill or shorten the life of the
product. All parts of the treadmill must be checked and tightened regularly. Worn out parts must be
replaced immediately.

BELT ADJUSTMENT

Proper maintenance is very important to ensure a faultless and operational condition of the
treadmill. Improper maintenance can cause damage to the treadmill or shorten the life of the
product.
All parts of the treadmill must be checked and tightened regularly. Worn out parts must be replaced
immediately.
Adjusting the belt deviation
All running belts are properly set at the factory and after assembly. But after a period, the belt have
the possibility for deviation. The reasons can be listed as follows.

The treadmill is unstable.

Feet didn't in the central of the running belt when running.

Feet exert uneven force.
If deviation caused by manual, No - load rotation for a few minutes can return to normal.
Adjusting step by step in half a turn with a 6mm Allen wrench that is equipped randomly for unable
to restore automatically.
CLEANING
Regular cleaning of the striding belt ensures a long product life.
Warning: The treadmill must be turned off to avoid electrical shocks. The power cord must be
pulled out of the socket, before starting the cleaning or maintenance.
After each training: Wipe the console and other surfaces with a clean soft and damp cloth to remove
sweat residues.
Caution: Do not use any abrasives or solvents. To avoid damage to the computer, keep any liquids
Weekly: To make the cleaning easier it is recommended to use a mat for the treadmill. Shoes can
leave dirt on the striding belt that can fall beneath the treadmill. Clean the mat under the treadmill
once a week.
away. Do not expose the computer to direct sunlight.