Specifications - Makita DUR141 Betriebsanleitung

ENGLISH (Original instructions)
1. Indication lamp
2. Switch trigger
3. Battery cartridge
4. Front grip
5. Clamping nut
6. Lock grip
7. Guard
8. Nylon cutting head
9. Red indicator
10. Button
11. Star marking

SPECIFICATIONS

Cutting diameter with nylon cutting head
Nylon cord diameter
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.................. Take particular care and attention.
........ Read instruction manual.
.................. Danger; be aware of thrown objects.
.................. The distance between the tool and
bystanders must be at least 15 m.
.......... Keep bystanders away.
.......... Keep distance at least 15 m.
Explanation of general view
12. Indicator lamps
13. Check button
14. Lock-off button
15. Shaft
16. Grip
17. Hex bolt
18. Screws
19. Cutter cover
20. Nylon cord eyehole
21. Notch of the nylon cutting head
installation port
Model
No load speed
Overall length
Net weight
Rated voltage
D.C.14.4 V Model
D.C.18 V Model
6,000 min
1,229 mm - 1,433 mm
2.6 - 2.9 kg
D.C. 14.4 V
BL1415N/BL1430B/BL1440/BL1460B
BL1815N/BL1820B/BL1830B/BL1840B/BL1850B/BL1860B
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF/DC18SH
.................. Avoid kickback.
END017-5
.................. Wear safety glasses.
.................. Wear ear protection.
.................. Wear a helmet, goggles and ear
.................. Wear protective gloves.
.................. Wear sturdy boots with nonslip soles.
.................. Do not expose to moisture.
22. Spring
23. Spool holder
24. Nylon cord
25. Retainer for nylon cord end
26. Spool
27. Shoulder strap
28. Hook
29. Motor housing
30. Lock button
DUR141
-1
1,229 mm - 1,433 mm
260 mm
1.65 mm
protection.
Steeltoed safety boots are
recommended.
DUR181
-1
7,800 min
260 mm
1.65 mm
2.6 - 3.0 kg
D.C. 18 V
7