Inhaltsverzeichnis; Specifications; Approved Power Unit; Intended Use - Makita EM403MP Originalbetriebsanleitung

ENGLISH (Original instructions)
TABLE OF CONTENTS
SPECIFICATIONS ......................................................11
SAFETY WARNINGS ................................................ 12
PARTS DESCRIPTION.............................................. 15
ASSEMBLY................................................................ 15

SPECIFICATIONS

Model:
Dimensions: length x width x height (without cutting tool)
Net weight
Nylon cord diameter
Cutting diameter
Gear ratio
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014

Approved power unit

This attachment is approved to use only with the follow-
ing power unit(s):
• EX2650LH Multi function power head
• DUX60, UX01G Cordless multi function power head
WARNING:
Never use the attachment with
non-approved power unit. Non-approved combi-
nation may cause serious injury.
Symbols
The following symbols are used on the attachment and
this instruction manual. Understand these definitions.
Take Particular care and attention!
Read instruction manual.
Wear protective helmet, eye and ear
protection!
Protective gloves must be worn!
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended!
Keep bystanders at least 15 m (50 ft) away.
15m(50 )
FT
Metal blade
Nylon cutting head
Plastic blade
OPERATION.............................................................. 17
MAINTENANCE......................................................... 18
TROUBLESHOOTING............................................... 19
EM403MP EM404MP
876 mm x 392 mm x 225 mm
1.5 kg
230 mm
14:19 13:21
Flying object hazard!
Kickback!
Top permissible tool speed
For EM405MP and EM406MP only
Never use metal blade.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.

Intended use

For EM403MP, EM404MP
This attachment is designed only for the purpose of
cutting grass, weed, bushes and undergrowth in con-
junction with an approved power unit. Never use the
attachment for the other purpose. Abusing the attach-
ment may cause serious injury.
For EM405MP, EM406MP
This attachment is designed only for the purpose of
trimming grass and light weed in conjunction with an
approved power unit. Never use the attachment for
the other purpose. Abusing the attachment may cause
serious injury.
11 ENGLISH
EM405MP EM406MP
876 mm x 187 mm x 232 mm
1.3 kg
2.0 - 2.4 mm
-
420 mm
255 mm
14:19 13:21