Inhaltsverzeichnis; Specifications; Approved Power Unit; Ec Declaration Of Conformity - Makita EM407MP Originalbetriebsanleitung

ENGLISH (Original instructions)
TABLE OF CONTENTS
SPECIFICATIONS ....................................................... 7
SAFETY WARNINGS .................................................. 8
PARTS DESCRIPTION .............................................. 12
ASSEMBLY ................................................................ 13

SPECIFICATIONS

Model:
Dimensions: length x width x height
Net weight
(without blade cover)
Cutting diameter
Gear ratio
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014

Approved power unit

This attachment is approved to use only with the follow-
ing power unit(s):
• EX2650LH Multi function power head
• DUX60 Cordless multi function power head
• DUX18 Cordless multi function power head
• UX01G Cordless multi function power head
WARNING:
Never use the attachment with
non-approved power unit. Non-approved combi-
nation may cause serious injury.
Symbols
The following symbols are used on the attachment and
this instruction manual. Understand these definitions.
Take Particular care and attention!
Read the instruction manual.
Wear protective helmet, eye and ear
protection!
Protective gloves must be worn!
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended!
Keep bystanders at least 15 m (50 ft) away.
15m(50 )
FT
OPERATION .............................................................. 13
MAINTENANCE ......................................................... 14
TROUBLESHOOTING ............................................... 16
965 mm x 245 mm x 155 mm
Upper blade : 1 : 26
Lower blade : 1 : 12
Danger; be aware of thrown objects.
Kickback!
Top permissible tool speed
Warning: Hot surface. Risk of burns. Do not
touch metal part until cooled.

EC Declaration of Conformity

For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Rotary Scissors Attachment.
Designation of Type(s): EM407MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufactured in
accordance with the following Harmonised Standards:
EN ISO 11806-1:2011, EN 60745-1:2009+A11:2010.
Place and date of declaration: Kortenberg, Belgium.
29.5.2020
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
7 ENGLISH
EM407MP
2.7 kg
230 mm