Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 50
• You have 2 memories, each with 60 memory spaces to store
the measurements of 2 different people separately.
Performing the blood pressure measurement
• As described above, attach the cuff and adopt the posture
in which you want to perform the measurement.
• Start the blood pressure monitor with the START/STOP
button
. All displays will illuminate briefly.
• The memory space that will be used is displayed.
• The cuff automatically inflates. The cuff's air pressure is
slowly released. If you already recognise a tendency for high
blood pressure, you should reinflate the cuff and increase
the cuff's pressure again. As soon as a pulse is found, the
pulse symbol
is displayed.
• Systolic pressure, diastolic pressure and pulse readings are
displayed.
You can cancel the measurement at any time by pressing
the START/STOP button
• Er _ appears if the measurement could not be performed
properly. Observe the chapter on error messages/trouble-
shooting in these instructions for use and repeat the meas-
urement.
• The measurement is automatically stored.
All manuals and user guides at all-guides.com
.
• To switch off the device, press the START/STOP button
If you forget to turn off the unit, it will switch off automati-
cally after approx. 1 minute.
Wait at least 5 minutes before taking another measurement.

6. Evaluating results

Cardiac arrhythmia:
This device can identify potential disruptions of the heart
rhythm when measuring and if necessary, indicates this after
the measurement with the symbol
tor for arrhythmia. Arrhythmia is an illness in which the heart
rhythm is abnormal because of flaws in the bioelectrical sys-
tem that regulates the heartbeat. The symptoms (skipped or
premature heart beats, pulse being slow or too fast) can be
caused by factors such as heart disease, age, physical make-
up, excess stimulants, stress or lack of sleep. Arrhythmia can
only be determined through an examination by your doctor.
If the symbol
is shown on the display after the measure-
ment has been taken, repeat the measurement. Please ensure
that you rest for 5 minutes beforehand and do not speak or
move during the measurement. If the symbol
frequently, please consult your doctor. Self-diagnosis and
treatment based on the measurements can be dangerous.
Always follow your GP's instructions.
33
. This can be an indica-
appears

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis