Preparing For The Measurement; Measuring Blood Pressure - Beurer medical BM 48 Gebrauchsanweisung

4. Preparing for the measurement

Inserting the batteries
• Remove the battery com-
partment lid on the rear of
the device.
• Insert four 1.5V AA (alkaline
type LR6) batteries. Make
sure that the batteries are
inserted the correct way
round. Do not use rechargeable batteries.
• Close the battery compartment lid again care-
fully.
• With inserted batteries, the unit permanently displays the
time and date.
If the low battery indicator
can no longer perform any measurements and must replace
the batteries. Once the batteries have been removed from the
unit, the time must be set again.
Used batteries should not be disposed of in normal household
waste. Dispose of them via your electronics retailer or your
local recycling point.
You are legally obligated to do so.
All manuals and user guides at all-guides.com
4 x AA (LR6) 1,5 V
is permanently displayed, you
Note: The codes below are printed on batteries containing
harmful substances: Pb: battery contains lead,
Cd: battery contains cadmium, Hg: battery con-
tains mercury.
Setting the date and time
It is essential to set the date and time. Otherwise,
you will not be able to save your measured values correctly
with a date and time and access them again later.
The time is displayed in the 24-hour format.
To set the date and time, proceed as follows:
• Press and hold the memory button M for 5 seconds.
• The year display will start to flash. Set the year with the
function buttons -/+ and confirm with the memory button M.
• Set the month, day, hour and minutes and confirm each
setting with the memory button M.

5. Measuring blood pressure

Please ensure the unit is at room temperature before measur-
ing. The measurement can be performed on the left or right
arm.
31