Beurer medical BM 48 Gebrauchsanweisung Seite 116

Table 4
For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between portable and mobile RF communications equipment and the BM 48
The BM 48 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer
or the user of the BM 48 can help prevent electromagnetic interference by maintaining a minimum distance between portable
and mobile RF communications equipment (transmitters) and the BM 48 as recommended below, according to the maximum
output power of the communications equipment.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters
(m) can be determined using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
All manuals and user guides at all-guides.com
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
not applicable
-
-
-
-
-
80 MHz to 800 MHz
d  1 2 . P
0,12
0,38
1,2
3,8
12
116
800 MHz to 2,5 GHz
d  P
2 3 .
0,23
0,73
2,3
7,3
23