Herunterladen Diese Seite drucken

Baninni IMPERO ISOFIX BN3501 Gebrauchsanleitung Seite 23

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5.2
This child seat can be used with the harness for children 9kg to18kg in
weight (group 1), installed forward-facing using ISOFIX anchorage.
Step 1: Place the ISOFIX base in car seat. Lift
the ISOFIX adjuster button up, the ISOFIX
attachment of both sides will stretch out. Latch
both of the ISOFIX attachments with the
corresponding ISOFIX lower anchorages
completely. Make sure the ISOFIX latching
indication shows GREEN. Then push the ISOFIX
base towards the car seat backrest until it is
firmly pressed against the car seat backrest.
Adjust the support leg to touch the ground
completely.
Step 3: Place your child into the child seat.
Check the height of the shoulder straps on the
correct position and fasten the buckle. Check
that the harness has not become twisted and
also check that the cover is not impeding the
movement or fit of the harness in any way.
To disassemble the child seat, repeat the
above prescribed procedures in reverse order.
Step 2: Secure the backrest on the ISOFIX
base forward-facing and adjust the child
seat to desired position. Meanwhile check
to make sure the backrest is securely
latched with the ISOFIX base and the child
seat latching indication shows GREEN.

Werbung

loading