Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.3. Usage of buckle.
Step 1
To use the buckle accurately ,please proceed as follows:
Step1. Put the two metal sections of the buckle connector together.
Step2. Slot the two buckle connectors into the slot in the buckle until they"click"place.
Step3. Check the harness is correctly locked by pulling the shoulder straps upwards.
To release the harness ,you can press the red button of the buckle downwards, the two
metal sections will be pop up .
4.4. Adjust and use the harness
Loosen the harness
The harness is slackened by pressing the
adjuster (under the seat cover) on the
front of the seat. Press down the adjuster
as you grip the two shoulder straps with
your another hand. Pull the shoulder
straps towards you to loosen the harness.
Step 2
Tighten the harness
Pull the shoulder straps upwards to remove
the slack from the lap sections of the
harness then pull the adjuster strap until
the harness is fully tightened. The harness
should be adjusted as tightly as possible
without causing discomfort to your child. A
loose harness can be dangerous. Check the
harness adjuster and tighten each time the
child is placed in the seat.
Step 3
Werbung
