Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MANUAL
4.8. Assemble and separate the IOSFIX base and backrest
STAP 3
Locking seat
Release seat
This child seat can be installed rearward-facing and forward-facing. If you
want to separate the ISOFIX base and backrest, push the seat release button,
then the seat locking button locked into the top cover of the base and the
backrest can be separated from the base. If assemble the ISOFIX base and
backrest, latch two shafts with the corresponding anchor points.Then press the
seat locking button and it can eject from the locked position of the top cover.
Now the child seat latching indication shows GREEN.
IMPORTANT:
Make sure the child seat latching indication shows GREEN by shaking the
backrest.
Werbung
