Baninni IMPERO ISOFIX BN3501 Gebrauchsanleitung Seite 19

4.7. Adjust the ISOFIX attachments
Longest position
STAP 1 STAP 2 STAP 3
The ISOFIX attachments can be adjusted for many positions to fit the
different positions of ISOFIX low anchorages expending from car seat.
As the picture shows, lift the ISOFIX adjuster button in front of the child
seat up, the ISOFIX attachment of both sides will eject to the longest
position. latch both of the ISOFIX attachments with the corresponding
ISOFIX lower anchorages. When you hear a "click" means that the ISOFIX
attachments and the ISOFIX lower anchorages are all latched completely
.Meanwhile the ISOFIX latching indication shows GREEN (see picture). If
you want to
release the ISOFIX attachments, just need to push the ISOFIX release
button(see picture).So the installation of the ISOFIX attachments is
finished. Next, you can lift the ISOFIX adjuster button up again and push
the child seat towards the car seat backrest until it is firmly pressed against
the car seat backrest. Now the installation of the ISOFIX base is finished.
IMPORTANT:
Except the first position (the longest position) has the
locking system, need to be adjusted by lifting the ISOFIX adjuster
button, other positions can be adjusted just by pushing the ISOFIX
base directly